Project Portfolio - Specialty Capabilities
After more than 25 years in the industry, it's no
surprise that Jacobs Linder has developed a large array of speciality
capabilities aimed at providing the maximum possible value to our
Clients.
Representative Projects:
Shell
-
"Ursa" TLP
3,800 ft water
depth – Gulf of Mexico, USA
150,000 BOPD, 400 MMSCFD |
 |
|
Comprehensive integration coordination and interface management,
including full-time, multi-discipline representation on-site at the
integration facility, and offshore during installation. |
ChevronTexaco
-
"Petronius"
Compliant Tower
1,754 ft water depth – Gulf of Mexico, USA
60,000 BOPD, 100 MMSCFD |
 |
| Detailed engineering
and design for the Waterflood Injection Expansion
Project, which increased water injection capacity from 72,000 to
110,000 BWPD. Design included the addition of two 1,250 HP
ESP-type injection pumps and a DRA skid, revisions to the existing
injection manifold, and associated interconnect piping and E&I
facilities. |
Shell -
"Mars" TLP
2,940 ft water
depth – Gulf of Mexico, USA
140,000 BOPD, 150 MMSCFD |
 |
|
Engineering, design, and construction support for a new Waste Heat
Recovery system, including system selection, detailed engineering &
design, and startup/commissioning support. |
MPNU / NNPC - Qua Iboe Terminal
Nigeria |
 |
| As-Built
walkdown and detailed engineering study of the electrical
distribution infrastructure at the existing QIT facility.
Included site surveys to document as-built upgrades
to existing facility one-lines and layout drawings, detailed power
system studies using SKM Power*Tools, and recommendations for safety
and performance upgrades. |
Shell
Gas Transmission, LLC - Station 701
Southern Louisiana, USA |
 |
| Detailed
engineering and design for a turbine upgrade at
an existing onshore compressor station, including detailed thermal
design of the new exhaust ducting, associated support structures,
and associated E&I interconnect with the existing controls system,
as well as installation and construction support. |
ExxonMobil -
"Section 17" Assessments
Gulf of Mexico, USA |
 |
| Structural
assessment of over 75 existing jacket structures in accordance with
API RP-2A "Section 17" requirements. Assessment process
included field surveys and review of Level I, II and III inspection
reports, screening, simplified assessments, detailed analysis, and
non-linear "pushover" analyses as required. |
Home | About
Us | Services | Experience
| Careers |
Contact
| Site Map
|
